Differences between revisions 2 and 3
Revision 2 as of 2013-01-05 22:33:48
Size: 1316
Editor: fungi
Comment:
Revision 3 as of 2013-01-05 22:34:33
Size: 1316
Editor: fungi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:
 #. perform 30/30/30 reset
 #
. connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port
 #. initial login is root/admin
 #. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]]
 #. wait an additional five minutes for good measure
 #. perform 30/30/30 reset
 #
. confirm [[http://192.168.1.1/|password reset page]] is displayed
 #. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]]
 #. wait an additional five minutes for good measure
 #. perform 30/30/30 reset
 #
. wait an additional five minutes for good measure
 #. confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner
 #. set password
 #
. disable both radios
 1. perform 30/30/30 reset
 1
. connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port
 1. initial login is root/admin
 1. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]]
 1. wait an additional five minutes for good measure
 1. perform 30/30/30 reset
 1
. confirm [[http://192.168.1.1/|password reset page]] is displayed
 1. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]]
 1. wait an additional five minutes for good measure
 1. perform 30/30/30 reset
 1
. wait an additional five minutes for good measure
 1. confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner
 1. set password
 1
. disable both radios

Notes on the core switch build and configuration...

  • Cisco/Linksys E4200 v1
  • two for redundant operation
  • a third as a cold spare
  • DD-WRT standard
  • higher-capacity power supplies
  • heatsinks and thermal adhesive for switch chips
  • perform 30/30/30 reset
  • connect as 192.168.1.2/30 to its WebUI through any LAN port

  • initial login is root/admin
  • upgrade flash with dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin

  • wait an additional five minutes for good measure
  • perform 30/30/30 reset
  • confirm password reset page is displayed

  • upgrade flash with dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin

  • wait an additional five minutes for good measure
  • perform 30/30/30 reset
  • wait an additional five minutes for good measure
  • confirm password reset page is displayed and correct firmware load shows in the top-right corner

  • set password
  • disable both radios

CCL: Configuration/CoreSwitching (last edited 2014-08-31 23:32:39 by fungi)

CC0 To the extent possible under law, the creator of this work has waived all copyright and related or neighboring rights to it.