Notes on the core switch build and configuration...
- Cisco/Linksys E4200 v1
- two for redundant operation
- a third as a cold spare
- DD-WRT standard
- higher-capacity power supplies
- heatsinks and thermal adhesive for switch chips # perform 30/30/30 reset
# connect as 192.168.1.2/30 to its WebUI through any LAN port # initial login is root/admin # upgrade flash with dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin # wait an additional five minutes for good measure # perform 30/30/30 reset # confirm password reset page is displayed # upgrade flash with dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin # wait an additional five minutes for good measure # perform 30/30/30 reset # wait an additional five minutes for good measure # confirm password reset page is displayed and correct firmware load shows in the top-right corner # set password # disable both radios