Notes on the core switch build and configuration...
- Cisco/Linksys E4200 v1
- two for redundant operation
- a third as a cold spare
- DD-WRT standard
- higher-capacity power supplies
- heatsinks and thermal adhesive for switch chips #. perform 30/30/30 reset
#. connect as 192.168.1.2/30 to its WebUI through any LAN port #. initial login is root/admin #. upgrade flash with dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin #. wait an additional five minutes for good measure #. perform 30/30/30 reset #. confirm password reset page is displayed #. upgrade flash with dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin #. wait an additional five minutes for good measure #. perform 30/30/30 reset #. wait an additional five minutes for good measure #. confirm password reset page is displayed and correct firmware load shows in the top-right corner #. set password #. disable both radios