|
⇤ ← Revision 1 as of 2013-01-05 22:32:30
Size: 1283
Comment:
|
Size: 1316
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 10: | Line 10: |
| # perform 30/30/30 reset # connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port # initial login is root/admin # upgrade flash with [[http://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]] # wait an additional five minutes for good measure # perform 30/30/30 reset # confirm [[http://192.168.1.1/|password reset page]] is displayed # upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]] # wait an additional five minutes for good measure # perform 30/30/30 reset # wait an additional five minutes for good measure # confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner # set password # disable both radios |
#. perform 30/30/30 reset #. connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port #. initial login is root/admin #. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]] #. wait an additional five minutes for good measure #. perform 30/30/30 reset #. confirm [[http://192.168.1.1/|password reset page]] is displayed #. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]] #. wait an additional five minutes for good measure #. perform 30/30/30 reset #. wait an additional five minutes for good measure #. confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner #. set password #. disable both radios |
Notes on the core switch build and configuration...
- Cisco/Linksys E4200 v1
- two for redundant operation
- a third as a cold spare
- DD-WRT standard
- higher-capacity power supplies
- heatsinks and thermal adhesive for switch chips #. perform 30/30/30 reset
#. connect as 192.168.1.2/30 to its WebUI through any LAN port #. initial login is root/admin #. upgrade flash with dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin #. wait an additional five minutes for good measure #. perform 30/30/30 reset #. confirm password reset page is displayed #. upgrade flash with dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin #. wait an additional five minutes for good measure #. perform 30/30/30 reset #. wait an additional five minutes for good measure #. confirm password reset page is displayed and correct firmware load shows in the top-right corner #. set password #. disable both radios
To the extent possible under law, the creator of this work has waived all copyright and related or neighboring rights to it.