Differences between revisions 1 and 11 (spanning 10 versions)
⇤ ← Revision 1 as of 2013-01-05 22:32:30 →
Size: 1283
Editor: fungi
Comment:
← Revision 11 as of 2013-01-05 23:05:13 → ⇥
Size: 2325
Editor: fungi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 6: Line 6:
 * DD-WRT standard
Line 9: Line 8:
 * DD-WRT standard
 * [[http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86919&postdays=0&postorder=asc&start=60|custom switch driver to allow 802.1q VLAN tag remapping]]
 * with modern iceweasel/firefox use Web Developer Extension -> Miscellaneous -> Clear Private Data -> Clear HTTP Authentication
Line 10: Line 12:
 # perform 30/30/30 reset
 # connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port
 # initial login is root/admin
 # upgrade flash with [[http://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]]
 # wait an additional five minutes for good measure
 # perform 30/30/30 reset
 # confirm [[http://192.168.1.1/|password reset page]] is displayed
 # upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]]
 # wait an additional five minutes for good measure
 # perform 30/30/30 reset
 # wait an additional five minutes for good measure
 # confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner
 # set password
 # disable both radios		 = Firmware Installation =

 1. perform 30/30/30 reset
 1. connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port
 1. initial login is root/admin
 1. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]]
 1. wait an additional five minutes for good measure
 1. perform 30/30/30 reset
 1. confirm [[http://192.168.1.1/|password reset page]] is displayed
 1. set root/admin as the new login
 1. backup the CFE as routername_cfe.bin (in embeds the original interface MAC) and stash it somewhere for safekeeping
 1. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]]
 1. wait an additional five minutes for good measure
 1. perform 30/30/30 reset
 1. wait an additional five minutes for good measure
 1. confirm [[http://192.168.1.1/|password reset page]] is displayed and ''Firmware: DD-WRT v24-sp2 (12/31/12) std-usb-nas'' shows in the top-right corner
 1. set root/admin as the new login (we'll change it to something safe last thing)

= Initial Configuration =

 * '''Setup'''
  * '''Basic Setup'''
   * '''WAN Setup'''
    * '''WAN Connection Type'''
     * '''Connection Type:''' Disabled
    * '''Optional Settings'''
     * '''Router Name:''' ''(enter the short hostname)''
     * '''Hostname:''' ''(reenter the short hostname)''
     * '''Domain Name:''' ''yuggoth.org''
     * '''STP:''' Enable
   * '''Network Setup'''
    * '''WAN Port'''
     * '''Assign WAN Port to Switch:''' Yes

Notes on the core switch build and configuration...

  • Cisco/Linksys E4200 v1
  • two for redundant operation
  • a third as a cold spare
  • higher-capacity power supplies
  • heatsinks and thermal adhesive for switch chips
  • DD-WRT standard

  • custom switch driver to allow 802.1q VLAN tag remapping

  • with modern iceweasel/firefox use Web Developer Extension -> Miscellaneous -> Clear Private Data -> Clear HTTP Authentication

Firmware Installation

  1. perform 30/30/30 reset

  2. connect as 192.168.1.2/30 to its WebUI through any LAN port

  3. initial login is root/admin

  4. upgrade flash with dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin

  5. wait an additional five minutes for good measure
  6. perform 30/30/30 reset

  7. confirm password reset page is displayed

  8. set root/admin as the new login
  9. backup the CFE as routername_cfe.bin (in embeds the original interface MAC) and stash it somewhere for safekeeping

  10. upgrade flash with dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin

  11. wait an additional five minutes for good measure
  12. perform 30/30/30 reset
  13. wait an additional five minutes for good measure

  14. confirm password reset page is displayed and Firmware: DD-WRT v24-sp2 (12/31/12) std-usb-nas shows in the top-right corner

  15. set root/admin as the new login (we'll change it to something safe last thing)

Initial Configuration

  • Setup

    • Basic Setup

      • WAN Setup

        • WAN Connection Type

          • Connection Type: Disabled

        • Optional Settings

          • Router Name: (enter the short hostname)

          • Hostname: (reenter the short hostname)

          • Domain Name: yuggoth.org

          • STP: Enable

      • Network Setup

        • WAN Port

          • Assign WAN Port to Switch: Yes

CCL: Configuration/CoreSwitching (last edited 2014-08-31 23:32:39 by fungi)

CC0 To the extent possible under law, the creator of this work has waived all copyright and related or neighboring rights to it.