Differences between revisions 2 and 4 (spanning 2 versions)
⇤ ← Revision 2 as of 2013-01-05 22:33:48 →
Size: 1316
Editor: fungi
Comment:
← Revision 4 as of 2013-01-05 22:35:05 → ⇥
Size: 1328
Editor: fungi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 10: Line 10:
 #. perform 30/30/30 reset
 #. connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port
 #. initial login is root/admin
 #. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]]
 #. wait an additional five minutes for good measure
 #. perform 30/30/30 reset
 #. confirm [[http://192.168.1.1/|password reset page]] is displayed
 #. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]]
 #. wait an additional five minutes for good measure
 #. perform 30/30/30 reset
 #. wait an additional five minutes for good measure
 #. confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner
 #. set password
 #. disable both radios		 Steps...

 1. perform 30/30/30 reset
 1. connect as 192.168.1.2/30 to [[http://192.168.1.1/|its WebUI]] through any LAN port
 1. initial login is root/admin
 1. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2012/03-19-12-r18777/broadcom_K26/dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin|dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin]]
 1. wait an additional five minutes for good measure
 1. perform 30/30/30 reset
 1. confirm [[http://192.168.1.1/|password reset page]] is displayed
 1. upgrade flash with [[http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/01-01-2013-r20453/broadcom_K26/dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin|dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin]]
 1. wait an additional five minutes for good measure
 1. perform 30/30/30 reset
 1. wait an additional five minutes for good measure
 1. confirm [[http://192.168.1.1/|password reset page]] is displayed and correct firmware load shows in the top-right corner
 1. set password
 1. disable both radios

Notes on the core switch build and configuration...

  • Cisco/Linksys E4200 v1
  • two for redundant operation
  • a third as a cold spare
  • DD-WRT standard
  • higher-capacity power supplies
  • heatsinks and thermal adhesive for switch chips

Steps...

  1. perform 30/30/30 reset

  2. connect as 192.168.1.2/30 to its WebUI through any LAN port

  3. initial login is root/admin

  4. upgrade flash with dd-wrt.v24-18777_NEWD-2_K2.6_mini-e4200.bin

  5. wait an additional five minutes for good measure
  6. perform 30/30/30 reset

  7. confirm password reset page is displayed

  8. upgrade flash with dd-wrt.v24-20453_NEWD-2_K2.6_std_usb_nas-nv60k.bin

  9. wait an additional five minutes for good measure
  10. perform 30/30/30 reset
  11. wait an additional five minutes for good measure

  12. confirm password reset page is displayed and correct firmware load shows in the top-right corner

  13. set password
  14. disable both radios

CCL: Configuration/CoreSwitching (last edited 2014-08-31 23:32:39 by fungi)

CC0 To the extent possible under law, the creator of this work has waived all copyright and related or neighboring rights to it.