|
Size: 1030
Comment:
|
Size: 1028
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| I started on a solderless breadboard, shown below, but those really aren't suited for higher-frequency prototyping and so I was getting stray USB device resets at random (particularly if I inadvertently brushed the ground line while not grounding myself first). I used the components in Greg Priest-Dorman's Digikey bill of materials, including the suggested 9x pull-up resistor SIP array (even though I was only testing with 7 keys). I also chose poorly on a preformed bank of 3 yellow LEDs which were somewhat larger than I expected; their rather rigid leads weren't quite a multiple of 0.1" standard breadboard pitch, causing them to crack superficially upon insertion. I used the excellent [[http://www.adafruit.com/products/601|AVR ATmegaXX8 Pinout Stickers]] from [[http://www.adafruit.com/|Adafruit Industries]] to more easily keep track of what I was connecting. | I started on a solderless breadboard, shown below, but those really aren't suited for higher-frequency prototyping and so I was getting stray USB device resets at random (particularly if I inadvertently brushed the ground line while not grounding myself first). I used the components in the SpiffChorder's Digikey bill of materials, including the suggested 9x pull-up resistor SIP array (even though I was only testing with 7 keys). I also chose poorly on a preformed bank of 3 yellow LEDs which were somewhat larger than I expected; their rather rigid leads weren't quite a multiple of 0.1" standard breadboard pitch, causing them to crack superficially upon insertion. I used the excellent [[http://www.adafruit.com/products/601|AVR ATmegaXX8 Pinout Stickers]] from [[http://www.adafruit.com/|Adafruit Industries]] to more easily keep track of what I was connecting. |
| Line 3: | Line 3: |
| [[attachment:SpiffChorderBreadboard.jpg|{{attachment:SpiffChorderBreadboardThumb.jpg|SpiffChorder Breadboard}}]] | [[attachment:SpiffChorderBreadboard.jpg|{{attachment:SpiffChorderBreadboardThumb.jpg|SpiffChorder breadboard}}]] |
I started on a solderless breadboard, shown below, but those really aren't suited for higher-frequency prototyping and so I was getting stray USB device resets at random (particularly if I inadvertently brushed the ground line while not grounding myself first). I used the components in the SpiffChorder's Digikey bill of materials, including the suggested 9x pull-up resistor SIP array (even though I was only testing with 7 keys). I also chose poorly on a preformed bank of 3 yellow LEDs which were somewhat larger than I expected; their rather rigid leads weren't quite a multiple of 0.1" standard breadboard pitch, causing them to crack superficially upon insertion. I used the excellent AVR ATmegaXX8 Pinout Stickers from Adafruit Industries to more easily keep track of what I was connecting.
To the extent possible under law, the creator of this work has waived all copyright and related or neighboring rights to it.